mailto: blog -at- heyrick -dot- eu
Girl's school uniforms, Яџѕѕіди Ѕтчlе?
Sometimes when you're looking for pictures, Google can throw up some oddball choices. And once in a while, you look because, whoa...
Let's start with a reasonably pretty blonde girl wearing an outfit that might have been inspired by Playmobil...
It is a site called http://www.papilio-kids.ru/, where papilio appears to be similar to the French papillon, or a butterfly. This photo comes from the "school uniform collection".
Next up, these two. They were in The Shining, weren't they?
I think this picture is helped immensely by the starkness of the clock. The design that looks corroded, the bright white, and the lack of hour markings.
This one. Let's be honest. It's the tie. It just screams "in sohvyet rrrrussia" (the tie wears you?), a style of joke popularised by Yakov Smirnoff a decade or two ago.
For my final example, we'll go right back to the orphanage for this identikit (can you tell them apart?) girl.
You can find all of these in the the 2014-2015 collection. Some of the other years are less freaky. You'll note if you look at the "glamour" section that it's mostly a bunch of over-the-top dresses in white, pastel, or stark primary colours. Except the 2014-2015 collection. Whoever designed that must have been having a bit of a crisis. Either that or monochrome clothes in a monochrome world was the "in" style that year.
For reference, this would have shortly followed when Malaysia Airlines Flight 17 was downed (Russia) / shot down (everybody else) apparently by Ukrainian separatists using Russian missiles - though conflicting opinions and reports may mean that the actual truth of what happened might never be known. Certainly, it casts a light on the sanity of carriers flying commercial aircraft over known areas of conflict.
I don't think these are actual school uniforms, more outfits for parents who like their little girls to look like they are
in the military wearing something non-descript akin to a school uniform.
But that tie. Bloody hell. Who would choose to dress their child like KGB-lite?
Crash, bang, wallop
Remember I said the other day that if Orange leave that hole in the road, some dummy with too much speed and not enough attention is going to fall into it? Well, luckily Orange filled in the hole, but here we can see the result of a car that was no doubt travelling too fast and failed to notice the sharp bend leading up to the level crossing. Note that this is within the town boundary where the speed limit is supposed to be 50 (about 30mph).
E-ink price labels
I saw this in a nearby supermarket yesterday.
The Swedish company Pricer AG, which seems to actually have a winking smiley as its logo, manufactures a range of electronic shelf-mounted price labels using e-ink technology. The most common are ones like that shown here, there are also larger ones (akin to a small ebook reader) typically used in the fruit and veg sections.
I am hoping that as the technology becomes more prevalent, the prices will start to drop, so that one will be able to buy inexpensive e-ink modules to connect to the Raspberry Pi. Cheaper, at least, than the PaPiRus that comes in at around fifty dollars from Adafruit for a 2.7" 264×176 display. Kubii (France) doesn't stock this, but given that they want over fifty euros for the smaller PaPiRus Zero ($35 at Adafruit), I think we can discount them.
The displays are available from Pimoroni for a more pleasing £35(ish). At least this is a sensible dollar-sterling conversion.
I can also buy a three-colour (smaller) e-ink display from AliExpress for something like €12. The difference here is in the amount of work necessary. The PaPiRus has a controller board that speaks some sort of SPI. A raw display needs data to be bit-banged into place. While that isn't a bit issue, and the display uses 3.3V signals so would interface with the Pi's GPIO, there is an issue in that in order to force a transition from white to black or black to white, one must also provide +20V and -22V to facilitate a change of state. It would be cool to buy a cheap ebook off eBay to hook a nice six inch e-ink to my Pi, but it's starting to get complicated with the tiny pitch of the interface ribbon cable, and the weird voltages. In the end I'll probably favour simplicity and get myself a PaPiRus.
For those with more patience and/or a larger toolkit, somebody has already done this: http://spritesmods.com/?art=einkdisplay&page=1
Why? Well, I've had a small OLED on my Pi for a while now, and while it is limited resolution (128×64), it is useful for displaying status without the need to turn a proper monitor on. I could get hold of an SPI TFT LCD panel (and that's always a possibility too), that and e-ink are attractive due to their low power consumption. Both have positives and negatives - the LCD would need a backlight (more power) which would need a way to disable (or dim right down) at night to reduce room illumination, but the resolutions are usually higher and colour is available. On the other hand, an e-ink display uses practically no power at all (only when changing). It may or may not have a backlight (doesn't need one in normal use), and doesn't support colour (some panels can do black/red). On the other hand, the display remains constant even in the absence of power, so in terms of debugging there is a potential use in having the system's exception handler spit out a register/stack dump to the display so that status can be seen in the moments leading up to a crash, even if the machine has gotten itself into a tizzy.
One should think of these as additional display options. In that case, some interesting possibilities arise.
Please note that while I check this page every so often, I am not able to control what users write; therefore I disclaim all liability for unpleasant and/or infringing and/or defamatory material. Undesired content will be removed as soon as it is noticed. By leaving a comment, you agree not to post material that is illegal or in bad taste, and you should be aware that the time and your IP address are both recorded, should it be necessary to find out who you are. Oh, and don't bother trying to inline HTML. I'm not that stupid! ☺ ADDING COMMENTS DOES NOT WORK IF READING TRANSLATED VERSIONS.
You can now follow comment additions with the comment RSS feed. This is distinct from the b.log RSS feed, so you can subscribe to one or both as you wish.
|Dr Dave Johnson , 4th April 2017, 22:46|
What do you think of playmobil?
|Rick, 4th April 2017, 23:11|
|Christopher, 8th July 2020, 23:49|
|Christopher , 8th July 2020, 23:49|
|Christopher , 8th July 2020, 23:50|
|Christopher , 8th July 2020, 23:50|
(Felicity? Marte? Find out!)
- Freaky electrics, That parcel, Seeds, Why I won't use plastic sheeting, Lunch? (2021/05/02)
- Potato experiment, Full Super Moon, ESP32-CAM silliness, Writing and CD ripping. (2021/04/27)
- I got up late (cat food), Battery soldering iron teardown, Stupid Amazon prices. (2021/04/25)
- The post has just arrived, An easy weekend, A free bin, Distance, Winning the lottery, Vaccination, ESP32-CAM power, RISC OS show, Future of RISC OS. (2021/04/24)
- A pleasant day, ESP32-CAM examples and settings. (2021/04/18)
List all b.log entries
Return to the site index
PS: Don't try to be clever.
It's a simple substring match.
Last read at 02:06 on 2021/05/06.
© 2017 Rick Murray
This web page is licenced for your personal, private, non-commercial use only. No automated processing by advertising systems is permitted.
RIPA notice: No consent is given for interception of page transmission.