heyrick1973 -at- yahoo -dot- co -dot uk
A nothing-happens weekend
This is probably a good thing. I had a nice flight of the helicopter on Friday. I zero wind (and I mean dead calm), I got the hang of using the dopey little tail rotor to put some control in the direction of flight. It has two states, on or off. Turning is achieved by a very very light touch on the stick, so that the rotors alter speed relative to each other, the faster rotor causing the body of the machine to rotate. As you can imagine, this is freakishly delicate, and more so when the thing is facing you so the controls are back to front to what you might expect.
Today I took it out and hooked the Nokia mobile phone to it. Well, held on underneath thanks to a rubber band. Not a sophisticated setup.
Weighing in at a shocking 100g, the phone worked as a camera (pointing straight down) provided I had a fully charged battery, then threw the helicopter in the air with the rotors at maximum throttle, and watched as it come back down a little quicker than would be nice.
It gives me a little bit of hope that a lighter camera might not support taking off, but it may stay in the air long enough to record something.
Here's the very first ever Rick helicam footage. And because it is pathetically uninteresting, I've stuck some other stuff recorded with the Nokia 6230i afterwards. This claims to be good quality. The original was, actually, worse. Here I zoomed it 200% and ran a smoothing/deblocking process with AVIDemux. It's still crap, though.
And to show the change in mobile phone techology in only five or so years, I took the helicopter out for a spin (ho-ho-boom) following a charge. The clicking you can hear every so often is me 'trimming' the settings. This is not the model with the built-in gyro. Sadly, as I suspect that would make life easier, though it might add to the weight?
I was not really flying, there was a very gentle breeze, so I let that carry the helicopter around. And, as many flights seem to do, it ended getting overly acquainted with the shrubbery. You'll notice the ground is soaking and the odd whisps of fog wafting across the view. Well, at least it isn't a foot deep in snow. There's that...
PS: Sorry Rob. ☺
Katakana - lesson 1
As you might have noticed, I have a set of katakana flashcards, which I do not look at as often as I should. So I though I might write an introductory course, which will pretty much mean I have to pay more attention.
Okay. Let's begin by knowing what we're looking at.
Japanese has three styles of writing:
There are more than 46 sounds in Japanese. For example, you won't find 'do' or 'kyo' in a basic kana list. These are formed by adding little symbols to certain kana to mark the sound change - for example to 'ト' with two little marks added becomes do 'ド'.
If you're still reading, don't panic! We'll take this real slow-and-easy.
Today, we will start with the vowels. The order of vowels in Japanese is a, i, u, e, o.
- ア a
Said like the 'a' in "hand".
There isn't anything to confuse this with.
- イ i
Said a bit like the 'ee' in "see".
There isn't anything to confuse this with.
- ウ u
Said a bit like the 'oo' in "spoon". Note that there is no "uh" sound in Japanese, so my name "Murray" cannot be said. A peculiarity of Japanese is that in numerous cases, the 'u' is not said. This is how アイスクリーム ("a-i-su-ku-rii-mu") can come out sounding roughly like "ice cream", though some people may say this with the 'u' sounds intact.
Be careful, the kana for wa is ワ is identical except for the little thing poking out the top.
- エ e
Said a bit like the 'e' in "elevator".
There isn't anything to confuse this with, except for the possibility of thinking it might be 'i' because of its resemblence to the latin I.
- オ o
Said a bit like the 'o' in "pot".
There isn't anything to confuse this twirly dancing guy with.
Did you notice how in the ice cream example, アイスクリーム, the 'a' and the 'i' were said as separate sounds? The 'eye' sound at the beginning of the word "ice" is approximated in Japanese by having an 'a' followed by an 'i', like "aa-ee".
That's it for today. Just those five. More next week. ☺
Please note that while I check this page every so often, I am not able to control what users write; therefore I disclaim all liability for unpleasant and/or infringing and/or defamatory material. Undesired content will be removed as soon as it is noticed. By leaving a comment, you agree not to post material that is illegal or in bad taste, and you should be aware that the time and your IP address are both recorded, should it be necessary to find out who you are. Oh, and don't bother trying to inline HTML. I'm not that stupid! ☺
You can now follow comment additions with the comment RSS feed. This is distinct from the b.log RSS feed, so you can subscribe to one or both as you wish.
|Rick, 26th February 2011, 18:06|
I should add, as the battery depletes, the relationship in speed between the rotor motors changes slightly, and this is why it will need frequent retrimming for hover-flight. It is less trouble when running in a controlled mode as you can joystick it, but it's pretty hard to do that and record... ;-)
|Rob, 28th February 2011, 10:39|
I wonder how easy it would be to wire up a couple of sensors and a microcontroller to handle that for you. Add in some programming options, and you could even get it flying autonomously ... Bet you could do it with a Beeb, but it might be a struggle getting the chopper to lift it..
|Rick, 8th March 2011, 02:49|
If the data format was known (looks cheap'n'cheerful, some sort of PCM?) it shouldn't be too hard to program something, indeed the later models have an on-board gyro to help keep the thing trim. I'd be more concerned about the accuracy of the sensing.
As for flying autonomously, I guess if it crashes into the bushes, it is not doing any worse than me. ;-)
Japanese Red Cross
Earthquake relief donations have closed.
Read about the JRC
Make a general donation
List all b.log entries
Return to the site index
Last read at 06:37 on 2017/11/22.
© 2011 Rick Murray
This web page is licenced for your personal, private, non-commercial use only. No automated processing by advertising systems is permitted.
RIPA notice: No consent is given for interception of page transmission.