mailto: blog -at- heyrick -dot- eu
A pleasant day
I stayed in bed late, partly because it was Sunday and partly because it went down to -1°C in the early hours which meant it took a while to warm up. About noonish (I was up way before that, was doing some stuff indoors), I went out. It had reached two digits, so was warming up. I wasn't too sure about the weather, quite a lot of cloud around.
My arm hurts from all the sawing that was required to fell and chop all those trees. I decided that I was going to have an easy weekend and not do anything stressful like that.
A "before" and an "after":
An unwanted willow is felled, for the second time.
It took forever to saw through that tree, and it was holding on by a piece of wood about the size of your thumb. But, eventually, it was taken down. With no help whatsoever from the cats. Thanks guys!
The gage can grow in peace now, without the fast-growing willow crowding it out.
Bad news? There's a big trunk that I still have to deal with.
Worse news? There are a few more unwanted willows that have sprung up.
Plus, I noticed, a lot of cleavers to deal with.
Through the afternoon I wrote the information below about the many options of the ESP32-CAM. The clouds had all gone away and it was really quite hot. It actually touched 16°C at half three, so I'm glad I opened the windows.
Because it felt hot in the sun, I put a hat on, like an Aussie kid. Case in point...
Screenshot from The InBESTigators, on Netflix.
Okay, okay, these kids (in a Netflix programme called The InBESTigators) are probably dealing with 30°C as it's set in a suburb to the south east of Melbourne, and I'm dealing with half that, but they're Aussies so they're naturally badass (even ten year old girls) and I'm just a whingin' pom. ☺
At about half five, I finished writing the ESP32-CAM stuff, so time to give Caoimhe a wash.
Car wash, the way that doesn't eat euro coins.
Following that, I swapped out the speakers supplied for the ones Alison gave me, which fit this car perfectly. No need for half-ass wedging the speakers in. I was even able to fit the speaker covers, though I needed to dig up some longer screws as the original ones were too short for all the layers of plastic.
Much improved bass response, too.
And, finally, I ought to go and make something to eat, but even as the temperature is slowly dropping, I am enjoying sitting in the evening sunshine to write this. But, alas, cats to feed and clothes to get off the line and windows to close and Rick to feed and..... I'd better upload this and get a move on!
ESP32-CAM examples and settings
The standard ESP32-CAM interface offers a pile of options and settings. I'll describe what they mean with some examples.
First of all, one has to note that internally, the camera offers three modes of operation:
- Read every pixel
This is used for the XGA, SXGA, and UXGA image sizes (that is to say, everything above 800×600).
- Read every other pixel
This is used for the VGA and SVGA image sizes (the 640×480 and 800×600).
- Read every fourth pixel
This is used for CIF (400×296) and everything below.
What happens is that the camera reads the image in one of those default sizes (1600×1200, 800×600, or 400×296) and scales it if necessary to one of the other sizes, if chosen.
Unfortunately, the act of reading different pixels like that does have a noticable effect on the image. Not just the quality, that is to be expected given the reduced number of pixels used, but also on the way colours appear.
Here is a resized (to fit the blog) image built from every pixel.
UXGA, using every pixel.
Here is a resized (to fit the blog) image built from every other pixel. This was taken moments before the UXGA image above.
SVGA, using every other pixel.
And, finally, here is an image built from every fourth pixel. As before, this was taken just before the previous image.
CIF, using every fourth pixel.
As you can see, the colour rendition of the lower size images is rather poor. Every other pixel gives an image that is less green and vibrant, while every fourth pixel looks like a winter's day.
When you go to use the camera with its browser interface, there is a huge variety of controls, namely this:
It appears as if the "Toggle settings" that appears at the very top (not in the screenshot) is slightly broken. It switches the entire control panel between visible and invisible. You'd perhaps have thought that it might have made more sense to leave the "Get Still" and "Start Stream" buttons?
Okay then. Let's go!
This allows you to choose what size your images will be. If you have the bandwidth, stick with UXGA as it'll give the best quality images.
Note, however, that face recognition requires CIF or smaller.
The smallest image size is QQVGA or a quarter of a quarter of VGA, 160×120, which looks like this:
I'm old enough and crusty enough to remember when games consoles were barely better than this, and it was cutting edge stuff.
I would like to point out that all of the examples shown below were taken with temporal proximity. They were all UXGA format, saved on my Samsung S9, and turned into a "collage" using the built in collage maker, to allow direct comparisons.
That image is the front at ten to eight in the evening.
The quality setting goes from 10 (best) to 63 (worst).
Don't be tempted to fiddle with the quality to speed things up, as the JPEG encoding is performed by the camera module, not the ESP32, so while downgrading quality can improve speed, it's not as big a boost as you might think.
Below is an example of the same image at both extremes of quality. The upper half is maximum quality (10) which produced a 218KiB file, and the lower half is the minimum quality (63) which produced a 68KiB file.
One time when it may be necessary to adjust the quality is if there is a lot of contrast inherent in your image. You will spot this because there will be a missing bit at the bottom of your image. This means that it maxed out (at 375KiB).
The image below failed with a quality of 10. Dropping the quality just a touch (to 12) allowed me to have the image without corruption.
Dropping quality to capture the entire image.
Just like with a TV or monitor, this controls the overall brightness of the image. It pretty much lightens or darkens everything, so isn't a great way to adjust things, but might be useful in some circumstances.
To the left, the brightness set to -2. In the middle, default (0) brightness, and to the right, the maximum (+2) brightness.
This is a more useful setting. It enhances (or reduces) the difference between the light and dark parts of the image. I tend to find a contrast setting of +1 to be pleasing, it also appears to sharpen the image slightly (it doesn't, but with a touch more contrast, edges stand out better).
As before, -2 on the left, 0 in the middle, and +2 on the right.
Saturation is the intensity of colours. No saturation would look monochrome, and total saturation would look like a cartoon.
As with brightness and contrast, the camera offers saturation in the range of -2 (on the left) to +2 (on the right). Depending on the conditions and the scene, a saturation of +1 might help to make the image more vivid.
- Special effect
Your possible effects are negative, greyscale, red tint, green tint, blue tint, and sepia (retro).
These are pretty much gimmicks. It's always better to capture in full colour, as all these sorts of things can be done with more finesse in post production using any competent image editor.
- AWB, AWB Gain, and WB Mode
AWB means Automatic White Balance. That is to say, to alter the colour rendition in order that white looks like white.
This might seem obvious, but what white looks like on a sunny day, a cloudy day, and under a domestic lightbulb...is entirely different.
The logic goes, if white looks correct, then so should the other colours.
The AWB setting turns the automatic ajustment on and off. AWB Gain, along with WB Mode allows you to switch to a preset if the automatic adjustment isn't quite getting it. However, in my (limited) experience with this camera, the best results are obtained by leaving the camera on fully automatic.
In the examples, the big part is the original image on automatic. To the right of that, "Sunny". Along the bottom row, "Cloudy", "Office", and "Home".
Personally, I believe one of the Office or Home to be incorrect. You see, Office has a strong blue hue. Perhaps this is to counteract the typical fluorescent lighting found in offices. Home, on the other hand, is an even stronger blue. I'd have expected something to counteract typical tungsten-style "warm white" lighting typically found in homes. I've not tried the camera at night, so I don't know which is correct, suffice to say that the cold blues of fluo tubes and the warm reds of tungsten lights are completely different. Something is surely wrong with these settings?
In my tests, mostly outdoors, the best results were obtained just by leaving the camera on automatic.
White balance examples.
- AEC Sensor and AE Level
This controls the Automatic Exposure. If you are shooting in daylight, leave the AEC Sensor on.
It works in tandem with the AE Level, which has a -2 to +2 range. Unlike Brightness, this doesn't just apply a lightening or darkening to the image, it instead controls the exposure. With -2, the exposure is made a little shorter so the image will appear darker. With +2, the exposure is made a little longer so the image will appear brighter. The purpose of this is usually to help to bring out details in the darker parts of images. Or if taking pictures with a bright background.
- AEC DSP
This applies some sort of Digital Signal Processing to the Automatic Exposure Control. I'm not exactly sure what, as the camera datasheet is missing quite a number of details, suffice to say that there is a clear difference between this turned off, and this turned on. It might slow down image acquisition or something, but on the other hand it helps images to look more vibrant.
AEC DSP examples.
Do not use this in daylight.
This option is only visible if the AEC is turned off. In this case, you have direct control over the exposure. Which is an ISO-like option from 0 to 1200. In daylight, anything above about 50 will result in a mostly white image. The drag-button is far too small for the sort of level of control necessary to set the exposure correctly.
Your best option is to set AEC and use the AE Level to push it a little as necessary.
This sets the Automatic Gain Control, how the camera responds to the overall level of light in the image. This is best left on.
- Gain Ceiling
This is visible when AGC is on, and it goes from 2× to 128×. This might have some effect in the dark, perhaps? In daylight it doesn't seem to do anything.
- BPC and WPC
It is believed that these stand for Black Pixel Correction and White Pixel Correction. That is to say, if an image pixel is defective and outputs either white (always on) or black (never on), then the camera will fudge nearby pixels in order to hide this.
On a normal, working, camera sensor, turning these options on and off will make no discernable difference.
- Raw GMA
I have no idea what Raw GMA actually means, suffice to say that in use it lightens up the image which brings out a lot of details. The pictures on this page were taken with AEC DSP and Raw GMA both turned on.
In the example below, Raw GMA off is at the top, and Raw GMA on is below. I'm sure you'll agree that On gives a much more pleasing image.
Raw GMA examples.
- Lens Correction
No idea, to be honest. It doesn't compensate for pincushioning or anything. When looking at a stream, turning if off appears to briefly darken the image and turning it on appears to briefly lighten the image, before the AEC brings the image back to what it was before.
In other words, in a daytime test, this didn't appear to make any difference.
- H-Mirror and V-Flip
H-Mirror will flip the image so left and right are reversed, while V-Flip will reverse top and bottom.
These may be useful if the camera is mounted upside down, to switch the image to be the right way up.
- DCW (Downsize EN)
When DCW is on, the image that you receive will be the size that you requested (VGA, QQVGA, etc).
When DCW is off, the image that you receive will be one of UXGA, SVGA, or CIF. In other words, literally the actual image size as read from the sensor without any scaling.
Note that if DCW is off, and you pick a different image size, this implicitly turns DCW back on again (although this isn't reflected in the options).
- Colour Bar
This does exactly what it says on the tin.
Colour bar example.
- Face Detection, Face Recognition, and Enroll Face
These are supposed to enable the camera's automatic detection of faces. I say "supposed to" as this does not work on my device. Apparently some board and/or Arduino IDE combinations are problematic.
Suffice to say, you switch to a low resolution and start the stream. Tapping on Enroll Face should cause the device to take five snapshots of the face visible on the screen. It will then be able to detect the face (with a yellow border around it) and say a message in green if the face is recognised, or "Intruder alert!" in red if it is not. I believe it can also control GPIO so that a recognised face could, for example, activate a lock. Or maybe a siren for an unrecognised face?
- Get Still
Will take a picture and return it as a JPEG.
- Start Stream or Stop Stream
This will start and stop the "video stream". I put video stream in quotes like that, because it is actually a MIME-separated series of JPEGs. It is not a valid MJPEG stream, so don't expect anything like MPlayer or VLC to know what to do with the data.
There. I hope this helps to clear up some of the many bewildering options offered by the ESP32-CAM's default firmware.
Strangely, there doesn't seem to be any option to turn the flash LED on and off...
Please note that while I check this page every so often, I am not able to control what users write; therefore I disclaim all liability for unpleasant and/or infringing and/or defamatory material. Undesired content will be removed as soon as it is noticed. By leaving a comment, you agree not to post material that is illegal or in bad taste, and you should be aware that the time and your IP address are both recorded, should it be necessary to find out who you are. Oh, and don't bother trying to inline HTML. I'm not that stupid! ☺ ADDING COMMENTS DOES NOT WORK IF READING TRANSLATED VERSIONS.
You can now follow comment additions with the comment RSS feed. This is distinct from the b.log RSS feed, so you can subscribe to one or both as you wish.
|Zerosquare, 18th April 2021, 23:46|
Skipping pixels can introduce aliasing artifacts, but shouldn't change the colour balance like that. Something else must be going on, probably different encoding parameters depending on the picture size.
On the other hand, even on the full-size, full-quality picture, it's pretty evident that it's using a 16-year old technology.
|Rick, 18th April 2021, 23:48|
Hmm, it looks like I might have my Gain pictures back to front. Not a surprise, mind you, it is hard to edit mostly dark pictures in sunlight! 😉
|David Pilling, 19th April 2021, 23:16|
Duuno. You could do things like look at the histograms for the image for different (RGB) colours for different resolutions. Or look at the R, G and B versions of the image to see if you can work out what they're doing (wrong).
The general theme this chimes with for me, is how grim results are from many low cost cameras. I even did not like the RasPi one. Presumably at some point phone camera technology will escape into other products and things will improve. Many are still using the first generation technology from way back, all the improvements come from telling bigger fibs in the specifications.
|David Pilling, 23rd April 2021, 18:40|
Cameras have more green than other colour pixels - don't suppose they are using a scaling algorithm for RGB on RGGB data.
|Jaggz, 2nd August 2021, 09:56|
Lens Correction: I noticed in low light conditions, when the brightness fades out towards the edges, it seems it does a radial gain increase, evening out the brightness across the whole image.
|Jaggz, 2nd August 2021, 10:15|
About the Exposure slider not offering enough control -- Users can use the http API to set values directly. (I'm not sure which setting though; never done it). Docs here (if you're using his fork of Expressif's sketch): https://github.com/easytarget/esp32-cam-webserver/blob/master/AP I.md
(Felicity? Marte? Find out!)
- Super-speed car oil change, Not enough WTF in the world, No rest for the wicked. (2021/10/14)
- A new British Passport, Working Saturday, Oops? You didn't mean to land there, did you? Feeling good and an unexpected trip into Big Town, My new strimmer, A note of sadness, Legitimate salvage. (2021/10/10)
- Superheroes, Halogen cooker and chips. (2021/10/02)
- The Brexit Benefits just keep on coming. (2021/09/28)
- Two years ago today, Sorry for the silence, Strimmer motor. (2021/09/27)
List all b.log entries
Return to the site index
PS: Don't try to be clever.
It's a simple substring match.
Last read at 17:59 on 2021/10/17.
© 2021 Rick Murray
This web page is licenced for your personal, private, non-commercial use only. No automated processing by advertising systems is permitted.
RIPA notice: No consent is given for interception of page transmission.