mailto: blog -at- heyrick -dot- eu

Fixing the blog

Now that I can connect to the server with SCP, I have been able to sort out a few loose ends. The mobile view is, as I write this, still not working. The installation of PHP does not have the DOM module enabled. Rob is working on it.

Search now works. It was a mass of regular expressions, all using the older (now removed) form of regex (eregi, split, etc). I must have copied that from a book or website.
Not a lot of that was retained. Because if I want to look for "needle" in "there is a needle in this haystack", then it's simpler to use a case insensitive string search than to figure out what regular expression will do what I want.
So, search now works like it did before. There's nothing fancy. It'll just look for words.

 

Update at 6pm: Mobile view works. Thanks Rob!

 

And... the toilet doesn't work

This lunchtime I popped to the toilet and... nothing. Just a buzz. And a full toilet bowl.

Long story short, I emptied the toilet with the mop and took the grinder off and opened it up. The motor doesn't turn unless it is turned by hand to get it going.
But I noticed something I hadn't noticed before. It was stiff.
So I hooked it up to my drill and gave it a spin unpowered and I could hear a sort of grinding coming from the motor that was hidden under the noise that it makes normally.

I think the problem isn't the capacitor, I think the problem might be the bearings or some sort of seal is on the way out. Or maybe it's rusty underneath? I don't know, I'm not going to look too deeply.

I'll leave it until the weekend to dry up a little back there, then I'll put everything back. I guess as long as it looks correct for the inspection, I don't imagine the person will want to see the toilet flush. What he'll be interested in is the lack of treatment, which is the other end of the pipe.

In the longer term... It's a Watermatic W12N (if I remember correctly). I can get a more modern version of that off Amazon for about €350. Or I can get a cheaper generic model for €120ish. But if I get the generic, I may need to have a plumber come out to fit it, as the outflow pipe is in a different place. There is a pipe running under the cistern (the old grinder ejected on the right, the current one on the left) but I don't really feel confident doing stuff with PVC piping that is expected to work under pressure. I'll just need to figure out whether the Watermatic is still going to be more expensive than the cheaper model plus plumber costs (apparently €30-70 per hour, plus €20-40 call out charge)...

 

Well, it's overcast and nowhere near as warm as it was yesterday. AccuWeather reckons the 5th of April will have a low of -5°C, with -4°C the following night. If that is correct, it'll be devastating to the fruit trees, and it isn't until the end of May that temperatures may start to return to what they are right now.

So... tea and... I think I'll make myself a pizza.

 

 

Your comments:

Please note that while I check this page every so often, I am not able to control what users write; therefore I disclaim all liability for unpleasant and/or infringing and/or defamatory material. Undesired content will be removed as soon as it is noticed. By leaving a comment, you agree not to post material that is illegal or in bad taste, and you should be aware that the time and your IP address are both recorded, should it be necessary to find out who you are. Oh, and don't bother trying to inline HTML. I'm not that stupid! ☺ ADDING COMMENTS DOES NOT WORK IF READING TRANSLATED VERSIONS.
 
You can now follow comment additions with the comment RSS feed. This is distinct from the b.log RSS feed, so you can subscribe to one or both as you wish.

John, 31st March 2021, 16:39
I think the proper word for a shot gibbler is "macerator". 
 
Rick, 31st March 2021, 18:00
Yes, that is the correct word, but it seems English speaking people generally refer to it as a "grinder", which is why I used that term. 
Still broken, whatever it is called... :-(
Rick, 31st March 2021, 18:16
Didn't have pizza in the end. Had a salad and some homemade cookies. 
Thinking I might have a bowl of porridge for dinner. 
As I suspected, I'm pretty washed out today. I'm still adjusting to summer time. With any luck, it'll just stay like this from now on with no more farting around switching the time twice a year for... remind me, what was the actual reason for that? It's only America, Canada, and much of western Europe (plus a bit of Australia) that changes their time. And, wasn't around the two wars that this was introduced, to save on coal and other fuels that were in short supply? 
 
I've just had a look, and it seems that the EU is showing great leadership by kicking the issue to member states, meaning that the whole thing is effectively blocked. Wonderful. 

Add a comment (v0.11) [help?] . . . try the comment feed!
Your name
Your email (optional)
Validation Are you real? Please type 38410 backwards.
Your comment
French flagSpanish flagJapanese flag
Calendar
«   March 2021   »
MonTueWedThuFriSatSun
12345
89101113
161718
22232425262728
29    

(Felicity? Marte? Find out!)

Last 5 entries

List all b.log entries

Return to the site index

Geekery
 
Alphabetical:

Search

Search Rick's b.log!

PS: Don't try to be clever.
It's a simple substring match.

Etc...

Last read at 23:40 on 2024/12/12.

QR code


Valid HTML 4.01 Transitional
Valid CSS
Valid RSS 2.0

 

© 2021 Rick Murray
This web page is licenced for your personal, private, non-commercial use only. No automated processing by advertising systems is permitted.
RIPA notice: No consent is given for interception of page transmission.

 

Have you noticed the watermarks on pictures?
Next entry - 2021/04/01
Return to top of page