It is the 1747th of March 2020 (aka the 11th of December 2024)
You are 18.97.14.90,
pleased to meet you!
mailto:blog-at-heyrick-dot-eu
Marte out of action
I got Marte going yesterday, so today she was much easier to start. I wanted to give a quick cut to some grass that was in danger of growing too much. You see, Marte can cut a lot of grass at once, but she isn't particularly powerful. Too tall, and it needs to be brought down by the other mower first. Which takes time. Lots of time.
Since it is supposed to be warmer and wetter for the rest of the week, well, I know what that means.
I took Marte out, with the bright LED light, and did most of the grass. Just as I was about to finish, a massive shower of sparks (that, actually, looked pretty impressive at night).
And now no more mower.
You may have noticed in previous pictures that there was a twisted metal "thingy" holding one of the blade arrangements in place. Well, that went. And in my diagnostics afterwards, I'd swear on a bible that it looks for all the world like something concocted from an old metal coat hanger.
The broken bit.
Unfortunately, that going also broke one of the other bolts. The bolt itself is fine, but where it fits into the mower housing has rusted away.
So now, there's only one bolt holding the blade in place.
I have tried WD40 and a 13mm wrench, but I don't think it's going to budge. I assume the weird DIY job with the twisted wire was because the previous owner wasn't able to undo the bolts either.
So I think I'm going to have to drill some holes through the deck (sort of as indicated in the picture below) to try to secure the blade mounting to the deck using shortish bolts and big washers. It won't be as sturdy as it ought to be (it's not the most solid part of the mounting, but it ought to be a little bit better than hacking something together with a coat hanger.
How to fix it?
I've never drilled into metal before, especially since I'll be doing it freehand. Do you have any tips? Please let me know in the comments.
Your comments:
Please note that while I check this page every so often, I am not able to control what users write; therefore I disclaim all liability for unpleasant and/or infringing and/or defamatory material. Undesired content will be removed as soon as it is noticed. By leaving a comment, you agree not to post material that is illegal or in bad taste, and you should be aware that the time and your IP address are both recorded, should it be necessary to find out who you are. Oh, and don't bother trying to inline HTML. I'm not that stupid! ☺ ADDING COMMENTS DOES NOT WORK IF READING TRANSLATED VERSIONS.
You can now follow comment additions with the comment RSS feed. This is distinct from the b.log RSS feed, so you can subscribe to one or both as you wish.
This web page is licenced for your personal, private, non-commercial use only. No automated processing by advertising systems is permitted.
RIPA notice: No consent is given for interception of page transmission.