SUB

From ARMwiki
(Difference between revisions)
Jump to: navigation, search
(Corrected dumb-ass mistake for which I kneel on the floor in utter, utter shame...)
(Added more descriptive title.)
 
Line 8: Line 8:
 
}}
 
}}
  
==SUB[S]==
+
==SUB[S] : Subtraction==
 
SUB will subtract one value from another.
 
SUB will subtract one value from another.
  

Latest revision as of 08:07, 22 December 2011

SUB
Instruction SUB[S]
Function Subtraction
Category Data processing
ARM family All
Notes -

Contents

[edit] SUB[S] : Subtraction

SUB will subtract one value from another.

Operand 1 is a register, operand 2 can be a register, shifted register, or an immediate value (which may be shifted).

If the S bit is set (SUBS), the N and Z flags are set according to the result, and the C and V flags are set as follows: C if the result generated a borrow (a not carry; unsigned underflow); V if the result generated a signed overflow.

SUB is useful for basic subtraction. Use SBC to perform subtraction with the Carry flag considered.

If you should need to perform the subtraction in reverse (i.e. the shifted register/immediate minus register), look at RSB (Reverse SuBtract) and RSC (Reverse Subtract with Carry).

SUBS can be a useful loop counter without the need for a comparison operation. Code such as the following may be used:

    MOV   R10, #123  ; our loop counter start value
  
  .loop
    ...some code here...
    SUBS  R10, R10, #1
    BNE   loop
  
    ; comes to here when EQ (ie when R10 = 0)


[edit] Syntax

  SUB<suffix>  <dest>, <op 1>, <op 2>

[edit] Function

  dest = op_1 - op_2

[edit] Example

  SUB  R0, R0, R1    ; Subtract R1 from R0
  SUB  R0, R0, #1    ; Decrement R0 by one

[edit] Technical

The instruction bit pattern is as follows:

31 - 28 27 26 25 24 - 21 20 19 - 16 15 - 12 11 - 0
condition 0 0 I 0 0 1 0 S op_1 dest op_2/shift
Personal tools
Namespaces

Variants
Actions
Navigation
Contents
Toolbox