SBC

From ARMwiki
Revision as of 07:32, 22 December 2011 by Admin (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
SBC
Instruction SBC[S]
Function Subtraction
Category Data processing
ARM family All
Notes -

Contents

SBC[S]

SBC will subtract one value from another, with Borrow (NOT Carry).

Operand 1 is a register, operand 2 can be a register, shifted register, or an immediate value (which may be shifted).

If the S bit is set (SBCS), the N and Z flags are set according to the result, and the C and V flags are set as follows: C if the result generated a borrow (a not-carry; unsigned underflow); V if the result generated a signed overflow.

SBC is used for multi-word subtraction. When used with SUB, you can perform 64 bit (etc) calculations.

If you should need to perform the subtraction in reverse (i.e. the shifted register/immediate minus register), look at RSB (Reverse SuBtract) and RSC (Reverse Subtract with Carry).

Syntax

  SBC<suffix>  <dest>, <op 1>, <op 2>

Function

  dest = op_1 - op_2 - NOT(Carry)

Example

If R0 and R1 hold a 64 bit value, and R2 and R3 hold a second, you can subtract the second from the first, leaving the difference in R4 and R5. In each case, the first register specified (R0, R2, R4) holds the least significant word.

  SUBS R4, R0, R2
  SBC  R5, R1, R3

Technical

The instruction bit pattern is as follows:

31 - 28 27 26 25 24 - 21 20 19 - 16 15 - 12 11 - 0
condition 0 0 I 0 1 1 0 S op_1 dest op_2/shift
Personal tools
Namespaces

Variants
Actions
Navigation
Contents
Toolbox