# MUL

From ARMwiki

Instruction | MUL |
---|---|

Function | Multiply |

Category | Multiply |

ARM family | All (except ARMv1) |

Notes | - |

## Contents |

## MUL : Multiply

MUL is used to multiply registers (signed or unsigned) to create a 32 bit result. Operand 2 is multiplied by operand 3, and the result is stored in operand 1. *All* operands are registers.

If the S bit is specified, the flags are N, Z, and C flags are updated as follows: N is the result bit 31, Z is set if the result is zero, and C is undefined. V is not updated.

There is also a Multiply with Accumulate instruction for multiplying with addition.

### Syntax

MUL <op 1>, <op 2>, <op 3>

### Function

op_1 = op_2 × op_3

### Example

MOV R1, #5 MOV R2, #3 MUL R0, R1, R2 ; R0 now equals 15

### Restrictions

- You cannot specify R15 for any of the operands.
- Having operand 1 and operand 2 be the same register is unpredicable, thus, for example, the following cannot be used:

MUL R0, R0, R1 ; try R0, R1, R0

- MUL provides the lower 32 bits of a 64 bit product, therefore the result is the same for both signed and unsigned values.

### Technical

The instruction bit pattern is as follows:

31 - 28 | 27 - 21 | 20 | 19 - 16 | 15 - 12 | 11 - 8 | 7 - 4 | 3 - 0 |
---|---|---|---|---|---|---|---|

condition | 0 0 0 0 0 0 0 | S | op_1 | 0 0 0 0 | op_3 | 1 0 0 1 | op_2 |