BIC will perform a bitwise AND of one register with the complement of a second. This sounds complicated, so think of it as a simple way to clear selected bits in a register - BIC with 1 clears that bit, and with 0 leaves it unchanged.
If the S bit is set (BICS), the N and Z flags are set according to the result, the C flag is updated according to the shifter, while the V flag is not altered.
BIC is useful for clearing selected bits in a register.
BIC<suffix> <dest>, <op 1>, <op 2>
dest = op_1 AND (NOT op_2)
BIC R0, R0, #3 ; clear bits zero and one of R0
The instruction bit pattern is as follows:
|31 - 28||27||26||25||24 - 21||20||19 - 16||15 - 12||11 - 0|
|condition||0||0||I||1 1 1 0||S||op_1||dest||op_2/shift|