ADC

From ARMwiki
Revision as of 06:56, 22 December 2011 by Admin (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
ADC
Instruction ADC[S]
Function Add with Carry
Category Data processing
ARM family All
Notes -

Contents

ADC[S] : Add with Carry

ADC will add two values and the Carry flag.

Operand 1 is a register, operand 2 can be a register, shifted register, or an immediate value (which may be shifted).

If the S bit is set (ADCS), the N and Z flags are set according to the result, and the C and V flags are set as follows: C if the result generated a carry (unsigned overflow); V if the result generated a signed overflow.

ADC is useful for multiword addition, for example adding two 64 bit values. Use ADD for basic addition.

Syntax

  ADC<suffix>  <dest>, <op 1>, <op 2>

Function

  dest = op_1 + op_2 + Carry

Example

If R0-R1 is a 64 bit value, and R2-R3 is another 64 bit value, the code below will add them, placing the result in R4-R5.

  ADDS R4, R0, R2
  ADC  R5, R1, R3

Technical

The instruction bit pattern is as follows:

31 - 28 27 26 25 24 - 21 20 19 - 16 15 - 12 11 - 0
condition 0 0 I 0 1 0 1 S op_1 dest op_2/shift

Note: If the I bit is zero, and bits 4 and 7 are both one (with bits 5,6 zero), the instruction is UMLAL, not ADC.

Personal tools
Namespaces

Variants
Actions
Navigation
Contents
Toolbox